While unvented hot water heaters are quite common, thermal store water heaters are also widely used in homes and apartments throughout the UK. These systems work very differently from unvented systems, and actually get around some of the more pertinent disadvantages of unvented water heaters. Popular models include Gledhill PulsaCoil, and Gledhill Torrent.

Thermal store water heaters are capable of providing the high flow rates of mains water pressure without the need for a reduction valve. They’re actually surprisingly simple in terms of basic operation – water within the cylinder is heated, and is then heat is disbursed through the home’s pipes by a heat exchanger without the heated water in the system ever actually coming into contact with the mains water. At EasyFlow, we offer thermal store water heater repair services for customers in Manchester, Liverpool and the surrounding areas.

Unlike vented systems, thermal store water heaters are fully vented into the atmosphere. They are also not pressurised. There are two separate water reservoirs here – a main cylinder, and a separate cold water chamber. The second chamber is both an expansion tank and a feed for the main tank.

Within the main tank, you’ll find an electric immersion heater element. These may be on an economy tariff, or they may not be. Note that thermal stores can be used with other sources of heat, and are particularly well suited for working with renewable energy sources, such as solar heating or heat pumps.

In an unvented hot water heater, the heated water is actually channelled through the home and disbursed through the pipes to the taps. However, thermal store water heaters do not distribute water through a home. Instead, the water actually stays within the cylinder at all times. They actually work in the reverse fashion of standard domestic hot water heaters.

Thermal store water heaters first warm and then store water in the cylinder. This heated water is then passed across a heat exchanger between the hot water heater and the main water lines, allowing heat from the water in the cylinder to warm the main lines, before the water is warmed once more, creating a constant cycle of hot water to maintain the optimum temperature within the water lines.

There are several reasons this is beneficial. First, it ensures that the quality of water in the main line remains as high as possible, removing the possibility of rust or corrosion from old water tanks contaminating a home’s water. Second, it conserves water and energy. Because the water within a thermal store water heater is never depleted, it can be more easily maintained at the optimum temperature without significant expenditures of energy.

There are a couple of different forms that heat exchangers can take with thermal store hot water heaters. One of those is a coil. In this system, mains pressure water passes through a coil of metal inside the hot water heater’s cylinder. The coil is wound a number of times to create a very large surface area.

In comparison with unvented hot water heaters, thermal store water heaters can offer a number of crucial advantages. These include the following:

• Mains pressure hot water to all taps.
• More hot water delivered than the capacity of the cylinder, saving space in the cupboard.
• Water delivered at a safe temperature due to the use of a blending valve.
• No specialist installation requirements involved.
• Building control does not need to be notified of the installation.
• There are no tanks required, further reducing installation space requirements.
• Feature a vented cylinder, which means no danger of over pressurisation or expensive pressure valves.
• Do not require any annual service.
• Can be used in conjunction with renewable energy systems.